Ether.Giga

По запросу

Запросить счет

Версия для печати

ALBEDO Ether.Giga - тестер Ethernet и IP, оснащенный всеми функциями для проведения привычных тестов, таких как BER и RFC2544, а также новых: Y.1564, Y.1731, FCS error insertion. Тестер дает техническим специалистам возможность быстрой и простой оценки QoS и SLA новых Multiplay-сервисов, а также проверки и устранения неполадок сервисов Ethernet, включая VoIP, IPTV, VoD, high-performance Computing, Virtualization, Data Centers, Storage, которые требуют значительной пропускной способности.

Комплектация

AT.EGiga.HH — Ether.Giga hand-held tester. Battery operated. GBE testing including dual 10/100/1000 Mb/s RJ-45 electrical ports, dual optical ports, QoS statistics, RFC2544 performance test, BER test, continuous / burst / ramp / random traffic generation, traffic statistics, error analysis, connectivity test (PING, Trace Route), analysis filters, event insertion, endpoint and pass-through operation modes, graphical display of events, report generation and export. Includes AC/DC adapter, transportation bag and one RJ-45 patch cable. SFP transceivers not included.
AT.EGiga.Mstr — Multistream Test. Generation over eight independent traffic streams. Eight analysis filters for each test port.
AT.EGiga.1564 — eSAM (ITU-T Y.1564). Test of up to 8 services simultaneously. Set up of CIR, EIR and policing rate. Per stream quality objectives. Measurement of Information rate (IR), Frame Transfer Delay (FTD), Frame Delay Variation (FDV), Frame Loss Ratio (FLR) and Availability. [REQUIRES: AT.EGiga.Mstr]
AT.EGiga.MPLS — MPLS test. Generation of a single or double label according RFC 3032. Configuration of TTL, Traffic class, Label . Filter selection rules by Label and Traffic class field. Frame analysis of MPLS Packets. Top LSPs (with Network search option).
AT.ELoop.HH — Ether.Loop hand-held. Battery operated. GBE loopback device operating at layers L1 – L4. RJ-45 port for 10BASE-T, 100BASE-TX and 1000BASE-T. SFP port 1000BASE-SX, 1000BASE-LX, 1000BASE-ZX and 1000BASE-BX. Includes rubber boot, AC/DC adapter and transportation bag. SFP transceivers not included.

Номер в Госреестре	Наименование СИ	Обозначение типа СИ	Изготовитель	Срок свидетельства или заводской номер
не в реестре

Ethernet Testing
Interfaces	Dual RJ-45 port for electrical connection 10/100/1000BASE-T; PoE detection and PoE transparency 2 x SFPs ports: 10BASE-T, 100BASE-TX, 100BASE-FX, 1000BASE-T, 1000BASE-SX, 1000BASE-LX, 1000BASE-ZX and 1000BASE-BX Autonegotiation: Bit rate at 10, 100, and 1000 Mbit/s, Disable autonegotiation and direct set up EtherType II (DIX v.2), IEEE 802.3, IEEE 802.1Q, and IEEE 802.1ad IEEE 802.2–LLC1 and IEEE 802.3–SNAP IIPv4 (RFC791), IPv6 RFC2460)
Generation	Single or multistream traffic generation (up to 8 independent streams) MAC address: Source / Destination, Default / User defined, Single / Range VLAN: Single VLAN support, Q-in-Q stacking, VID, DEI, S-VLAN, C-VLAN, and Priority codepoint Type / Length: Generation/Analysis, Jumbo frames with MTU up to 10 kB Bandwidth Profile: Constant, in bit/s and frames/s, Periodic Burst, in high/low traffic, Ramp, in high/low traffic, Poisson
Loopback	L1 (wire loopback) at the far end Rx is forwarded to Tx L2 (frame), MAC addresses are swapped; L3 (packet) IP addresses are swapped; L4 (application) ports are swapped Loop controls for broadcast and ICMP frames
Test Suite	Code Errors Insertion Single, burst, rate, random, FCS error insertion in pass-through mode Test Patterns: Insertion modes: single, rate and random Unframed Layer 1 (IEEE 802.3-2008 Annex 36A): High, Low, Mixed Frequency Test Pattern, Long and Short continuous random Unframed Layer 1 (NCITS TR-25-1999): RPAT, JJTPAT, SPAT Framed Layer 1-4 BERT; PRB: 211-1, 215-1, 220-1, 223-1, 231-1 and inverted, All 1, all 0, and user-defined (32 bits) SLA Measurement Payload: QoS statistics according to Y.1731
RFC 2544	RFC 2544: Throughput, Latency, Frame Loss, Back-to-back, Recovery Symmetric and Asymmetric RFC 2544
Y.1564 (eSAM)	Testing of up to eight services (non-color aware mode) or up to four services (color aware mode) Configuration of the CIR, and EIR and maximum throughput for each service Configuration tests (CIR, EIR and policing) with FTD, FDV, FLR and availability results for each service Performance test with FTD, FDV, FLR and availability results for all services
Results	SFP: Presence current interface, Vendor, Part number Optical power (over compatible SFP) PoE (IEEE 802.3af), PoE+ (IEEE 802.3at), none; PoE voltage between pairs in endpoint; Voltage and current in through mode Twisted Cable: MDI/MDI-X status, Open (fault distance), Cable Length Test, Short (distance), Polarities, Pair Skew, Crosstalk Autonegotiation: Current bit rate, Duplex mode Frame Delay (FTD) Y.1563: Min/Max/Med/Mea Frame Delay Variation (FDV) RFC1889: Peak; Jitter Curr/Max/Min/Mean Frame Loss (FLR) Y.1563, Duplicated: Out-of-Order packets (RFC 5236) Availability: SES and Y.1563 PEU BER: Count, seconds with errors, Pattern losses, pattern loss second
Filters	Up to 8 filters for Counts and Statistics at MAC, IP, TCP/UDP, Arbitrary [mask + offset] Ethernet Selection: MAC address, Type/Length, C-VID, S-VID, CoS and Priority with selection mask IPv4 and IPv6 Selection: address, protocol, DSCP, Flow (v6): single value or range TCP/UDP Selection: port: single value or range
Statistics	Separate reports per Port A & B, Tx/Rx (transmit & receive), Active filter, Automatic filtering blocks for top talkers Top 16 talkers: Sour/Dest MAC / IPv4 / IPv6 addresses, VID (VLAN), C-VID (Q_in_Q), S-VID (MPLS) Ethernet Frame Counts (RFC 2819): VLAN, Q-in-Q, Priority, Control, Pause, BPDUs Tx/Rx Uni-Multi-Broadcast, Errors, Undersized, Oversized, Fragments, Jabbers, Runts, (Late) Collisions, Sizes, MPLS stack length Bandwidth Statistics: (in bit/s, frame/s, %) Rate, Max, Min, Aver, Occupancy, Unicast, Multicast, Broadcast IPv4 & IPv6 counts: (in bit/s, frame/s, %) Unicast, Multicast, Broadcast, Errors, TCP, UDP, ICMP
ICMP	RFC 792: IP ping / Traceroute feature Generation of ICMP echo request: Destination IP address, Packet length, Generation interval Analysis of ICMP echo reply: Round trip time, Lost packets, Time-To-Live Exceeded, Port unreachable
Operation and Management
Performance	Full Duplex operation at 1 Gbit/s or 1,5 Mframes/s, Accuracy better than 10^-6 secs. at 1 Gbit/s Performance and accuracy 100% independent of the line bit rate
Platform
Hand-held Instrument	Touchscreen 480 x 272 TFT, Mouse, USB & Ethernet ports; 1.0 kg, 223 x 144 x 65mm; IP-54 Soft LEDS All events at a glance Rechargeable Batteries continuous working up to 12 hours continuous operation. Fast recharging time AC Power Adapter Input: 100 ~ 240 V AC, 50/60 Hz, Operating Temperature 0ºC ~ 50º C Storage Temperature -20ºC ~ 70ºC Humidity 5% ~ 95%; IP rating 54 SNMP, MIB and VNC remote control

Подробные технические характеристики, информация производителя, брошюры:

Каталоги производителя:

Раздел не найден

Ether.Giga

Подробные технические характеристики, информация производителя, брошюры:

Популярные в разделе

Вы смотрели