с полосой пропускания 1 ГГц
Осциллограф LeCroy WavePro 7100
с полосой пропускания 1 ГГц
WavePro 7100
По запросу
Серия WavePro 7000 от LeCroy предоставляет возможность проводить измерения и анализ сигналов нового поколения, а не только «просматривать» сигналы, в приложениях с полосой пропускания 1 ГГц, 2 ГГц и 3 ГГц. Подключите любой пассивный или активный пробник, и осциллограф WavePro готов к измерениям — удобно и точно. LeCroy интегрировала свою новаторскую технологию X-Stream в семейство WavePro и объединила ее с наиболее интуитивно понятным пользовательским интерфейсом (UI). Такая способность дает вам большую уверенность в измерениях, которые вы делаете. Уверенности можно достичь только за счет быстрой передискретизации со скоростью 10 Гвыб/с на всех каналах, памяти сбора данных до 48 миллионов точек для обеспечения быстрой выборки даже для длинных сложных сигналов и превосходных характеристик минимального уровня шума джиттера. Серия WavePro 7000 может проводить анализ формы волны в 10–100 раз быстрее, чем любой другой осциллограф этого класса. Это делает их отличными инструментами для разработок следующего поколения, таких как разработка стандартов передачи данных/телекоммуникаций, Gigabit Ethernet, USB 2.0, цифрового проектирования и отладки, а также передовых военных разработок. Лучшее понимание сигналов Серия WavePro 7000 предлагает несколько вариантов, чтобы вы могли лучше понять сигналы в проекте. Просто нажмите Zoom, чтобы увидеть расширенные детали сигнала. Просматривайте графические представления, такие как гистиконы, дорожки и тренды, о том, как измерения меняются по всему сигналу. Используйте 3-D Analog Persistence, чтобы получить лучшее представление о джиттере, а затем измеряйте непосредственно по трассе. Устройства WavePro 7100, 7200 и 7300 стандартно поставляются с памятью 1 Мб на канал. А устройство WavePro 7000 начального уровня с частотой 1 ГГц обеспечивает доступ к технологии LeCroy X-Stream по исключительной цене. Дополнительные пакеты приложений фокусируют возможности WavePro DSO на конкретных измерениях при тестировании оптических и электрических масок, измерениях магнитных и оптических дисков, а также в приложениях синхронизации и синхронизации.
| Номер в Госреестре | Наименование СИ | Обозначение типа СИ | Изготовитель | Срок свидетельства или заводской номер |
|---|---|---|---|---|
| 28223-04 | Осциллографы цифровые запоминающие | WP 7000, WP 7100, WP 7200, WP 7300 | Компания "LeCroy Corporation", США | 01.12.2009 |
| Vertical System | |
| Analog Bandwidth @ 50 Ω (-3 dB) | 1 GHz |
| Rise Time (Typical) | 400 ps |
| Input Channels | 4 |
| Bandwidth Limiters | 25 MHz; 200 MHz |
| Input Impedance | 50 Ω;1 MΩ//11pF typical (using PP005A probe) |
| Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC |
| Maximum Input Voltage | 50Ω:5 Vrms,1 MΩ: 100 Vmax (peak AC: ≤ 5 KHz + DC) |
| Channel-Channel Isolation | 250:1 at same V/div setting, 40:1 at 3 GHz |
| Vertical Resolution | 8 bits; up to 11 bits with enhanced resolution (ERES) |
| Sensitivity | 50Ω:2 mV – 1 V/div fully variable; 1 MΩ:2 mV – 2 V/div fully variable |
| DC Gain Accuracy | ±1.5% of full scale; ±1% (typical) |
| Offset Range |
50Ω: ±700 mV @ 2–4.99 mV/div ±1.5 V @ 5–100 mV/div ±10 V @ .102–1 V/div |
|
1 MΩ: ±700 mV @ 2–4.99 mV/div ±1.5 V @ 5–100 mV/div ±20 V @ 0.102–2 V/div |
|
| Offset Accuracy | ±(1.5% of full scale + 0.5% of offset value + 2 mV) |
| Horizontal System | |
| Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input |
| Time/Division Range | 20 ps/div – 10 s/div (normal and single-shot mode) |
| Math & Zoom Traces |
4 independent zoom and 4 math/zoom traces standard; 8 math/zoom traces available with XMAP (Master Analysis package) or XMATH (Advanced Math package) |
| Clock Accuracy | ± ≤ 10 ppm @ 0–40 °C |
| Time Interval Accuracy | ≤ 0.06 / SR + (10 ppm * Reading) (rms) |
| Sample Rate & Delay Time Accuracy | ± 10 ppm ≤ 10 s interval |
| Jitter Noise Floor | 2 ps rms @ 100 mV/div (typical) |
| Trigger & Interpolator Jitter | ≤ 2.5 ps (typical) |
| Channel-Channel Deskew Range | ±4.5 ns |
| External Clock | 30 MHz – 1 GHz; 50Ω impedance; applied at the auxiliary input |
| Acquisition System | |
| Single-Shot Sample Rate/Ch | 10 GS/s |
| 2 Channel Max | 20 GS/s |
| Random Interleaved Sampling (RIS) | 200 GS/s for repetitive signals: 20 ps/div – 1 µs/div |
| Maximum Trigger Rate | 150,000 waveforms/second (in Sequence Mode, up to 4 channels) |
| Intersegment Time | ≤ 6 µs |
| Maximum Acquisition Points/Ch | 4 Ch / (2 Ch) |
| Standard | 1M / 2M |
| M – Memory Option | 4M / 8M |
| L – Memory Option | 8M / 16M |
| VL – Memory Option | 16M / 32M |
| XL – Memory Option | 24M / 48M |
| Acquisition Processing | |
| Averaging | Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) | From 8.5 to 11 bits vertical resolution |
| Envelope (Extrema) | Envelope, floor, roof for up to 1 million sweeps |
| Interpolation | Linear, Sin x/x |
| Triggering System | |
| Modes | Normal, Auto, Single, and Stop |
| Sources | Any input channel, External, Ext X10, Ext/10, or line; slope and level unique to each source (except line trigger) |
| Coupling mode | DC50 Ω, GND, DC1MΩ, AC1MΩ |
| Pre-trigger delay | 0–100% of horizontal time scale |
| Post-trigger delay | 0–10,000 divisions |
| Hold-off by time or events | Up to 20 s or from 1 to 99,999,999 events |
| Internal trigger range | ±5 div from center |
| Max trigger frequency | 1 GHz w/Edge Trigger; 750 MHz w/SMART Trigger |
| Basic Triggers | |
| Edge/Slope/Line | Triggers when signal meets slope and level condition |
| SMART Triggers® | |
| State or Edge Qualified | Triggers on any input source only if a defined state or edge occurred on another input source.Delay between sources is selectable by time or events. |
| Dropout | Triggers if signal drops out for longer than selected time between 2 ns and 20 s. |
| Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input).Each source can be high, low, or don’t care. The high and low level can be selected independently. Triggers at start or end of the pattern. |
| SMART Triggers with Exclusion Technology | |
| Glitch | Triggers on positive or negative glitches with widths selectable from 600 ps to 20 s or on intermittent faults. |
| Signal or Pattern Width | Triggers on positive or negative pulse widths selectable from 600 ps to 20 s or on intermittent faults. |
| Signal or Pattern Interval | Triggers on intervals selectable between 2 ns and 20 s. |
| Automatic Setup | |
| Auto Setup | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals. |
| Vertical Find Scale | Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range. |
| Probes | |
| Probes | (2) PP005A standard; Optional passive and active probes available. |
| Probe System: Probus | Automatically detects and supports a variety of compatible probes. |
| Scale Factors | Automatically or manually selected depending on probe used. |
| Color Waveform Display | |
| Type | Color 10.4" flat-panel TFT-LCD with high resolution touch screen |
| Resolution | SVGA; 800 x 600 pixels |
| Real time Clock | Dates, hours, minutes, seconds displayed with waveform. SNTP support to synchronize to precision internet clocks. |
| Number of Traces | Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces. |
| Grid Styles | Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY |
| Waveform Style | Sample dots joined or dots only |
| Analog Persistence Display | |
| Analog & Color-Graded Persistence | Variable saturation levels; stores each trace’s persistence data in memory. |
| Persistence Selections | Select analog, color, or three-dimensional. |
| Trace Selection | Activate persistence on all or any combination of traces. |
| Persistence Aging Time | Select from 500 ms to infinity. |
| Sweeps Displayed | All accumulated, or all accumulated with last trace highlighted |
| Zoom Expansion Traces | |
| CPU | Display up to 4 Zoom and 4 Math/Zoom traces;8 Math/Zoom traces available with XMAP (Master Analysis package) or XMATH (Advanced Math package). |
| Processor | Processor Intel Pentium 4 @ 2.53 GHz (or better) with MS Windows 2000 Platform |
| Processing Memory | Up to 2 Gbytes |
| Internal Waveform Memory | M1, M2, M3, M4 Internal Waveform Memory (store full-length waveforms with 16 bits/data point) or store to any number of files limited only by data storage media |
| Setup Storage | |
| Front Panel and Instrument Status | Store to the internal hard drive, floppy drive or to a USB-connected peripheral device. |
| Interface | |
| Remote Control | Via Windows Automation, or via LeCroy Remote Command Set |
| GPIB Port (Optional) | Supports IEEE – 488.2 |
| Ethernet Port | 10/100Base-T Ethernet interface |
| Floppy Drive | Internal, DOS-format, 3.5" high-density |
| USB Ports | 4 USB ports support Windows compatible devices |
| External Monitor Port Standard | 15-pin D-Type SVGA-compatible |
| Parallel Port | 1 standard |
| Auxiliary Output | |
| Signal Types | Select from calibrator or control signals output on front panel |
| Calibrator Signal | 5 Hz–5 MHz square wave or DC level; 0.0 to 5.0 V into 50 Ω (0–1 V into 1 MΩ) or TTL volts (selectable) |
| Control Signals | Trigger enabled, trigger out, pass/fail status |
| Auxiliary Input | |
| Signal Types | Selected from External Trigger or External Clock input on front panel |
| General | |
| Auto Calibration | Ensures specified DC and timing accuracy is maintained for 1 year minimum |
| Power Requirements | 100–120 VAC at 50/60/400 Hz; 200–240 VAC at 50/60 Hz; Automatic AC Voltage selection Power consumption: < 800 VA |
| Environmental | |
| Temperature (Operating) | +5˚C to +40˚C including floppy disk and CD-ROM drives |
| Temperature (Non-Operating) | -20 ˚C to +60 ˚C |
| Humidity (Operating) | 5% to 80% relative humidity (non-condensing) up to +30 ˚C. Upper limit derates to 25% relative humidity (non-condensing) at +40 ˚C |
| Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) | up to 10,000 ft (3048 m) at or below +25 ˚C |
| Altitude (Non-Operating) | up to 40,000 ft (12,192 m) |
| Random Vibration (Operating) | 0.31 g rms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes |
| Random Vibration (Non-Operating) | 2.4 g rms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes |
| Functional Shock | 20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total |
| Physical Dimensions | |
| Dimensions (HWD) | 264 mm x 397 mm x 491 mm; 10.4" x 15.6" x 19.3" (height excludes feet) |
| Weight | 18 kg; 39 lbs. |
| Shipping Weight | 24 kg; 53 lbs. |
| Certifications | CE Approved, UL and cUL listed; conforms to EN 61326-1, EN 61010-1, UL 3111-1, and CSA C22.2 No. 1010.1 |
Подробные технические характеристики, информация производителя, брошюры:
-
Каталоги производителя:
